Italy electric grout pump with water cooling and air cooling
Description
The LGH 75/100 high pressure vertical grouting pump is designed and made for permeation grouting, compaction grouting, backfilling grouting, curtain grouting, high pressure split grouting etc, grouting methods.
Grouting material: cement mixture, mortar/plaster, bentonite and other additive.
Features:
Compact structure, light weight, easy operate, low maintenance cost;
With digital display counter: it can display at any time, and can accumulate work times;
Flow and pressure can be adjusted step-less
Equipped with emergency unloading valve: in case of an emergency, it can be load-off instantly;
In low pressure, it will be flow-converging of two pumps; In high pressure, there is only one pump work. Low pressure and large flow, high pressure and low output;
With full-hydraulic shaft device, stable and reliable operation;
Cooling type: water-cooling and air cooling; Suitable for hot and cold areas.
Application
Civil Engineering - dam foundations, tunnels, mining, soil nails, tiebacks, earth anchors, cable and rock bolts
Structural - building and bridge restoration, foundation stabilization, foundation raising, soil compaction grouting; soil & rock grouting
Construction - pavement under sealing, slab jacking and slab raising
Marine - underwater foundations, piers, breakers, shoreline foundations
Mining - tunnel lining, contact grouting, shaft waterproofing
Utilities - encasements, waterproofing, slope line grouting
Geotechnical - deep well casing, monitor wells, well sealing and abandonment
Technology Parameters:
Item |
LGH75/100 PI-E grout pump |
|
Piston diameter |
100mm |
|
Piston stroke |
150mm |
|
Adjustable pressure ( low pressure) |
0-50Bar/725psi |
|
Adjustable flow rate( low pressure) |
0-75L/min |
|
Adjustable pressure ( high pressure) |
0-100Bar1450psi |
|
Adjustable flow rate ( high pressure) |
0-40L/min |
|
Discharge pipe size: |
M27x2 |
|
Inlet pipe size: |
G2'' |
|
Power Unit |
7.5kW |
|
Chassis |
Skid |
|
Weight |
390Kg |
|
Overall Dimension |
1040x550x1650mm |
|
Note: Chassis: Skid or Tyre
We also could according to your demands to customize |
|